Garmin Software Version 0321.23 Handbuch Seite 64

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 266
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 63
Page 3-20 G1000 System Maintenance Manual – Diamond DA40/40F
Revision G 190-00545-01
Table 3-5. LRU to Configuration File Relationship Summary (Cont)
LRU
PFD
MFD
#1 GIA 63
#2 GIA 63
GMA 1347
GTX 33
GEA 71
GDC 74B
GDL 69A
GDL 59
FILE NAME
AIRFRAMEME
AIRFRAME
ALERTS
SYSTEM
PFD 1
MANIFEST
CAL
(2)
MFD
GIA 1
AUDIO CFG
GIA 2
AUDIO CFG
GMA
GTX 1
GEA 1
GDC 1
GDL SYSTEM
GDL 59
CONFIGURATIONS
OPTIONS ACTIVATION
CONFIGURATION
TAWS
(3)(4)
X
CHARTVIEW
(3)(4)
X
ESP
(3)(4)
X X
ENHANCED
SEARCH &
RESCUE
(3)(4)
X
SYNTHETIC
VISION &
PATHWAYS
(3)(4)
X
IMPORTANT!
(1) Noted options are not certified for activation under this STC. An alternate additional installation
approval must be obtained for these options.
(2) RELOADING THE CAL FILE REQUIRES FUEL TANK RECALIBRATION!
(3) To enable these functions, a separate “Enable” SD Card is required. See the appropriate General
Arrangement drawing for card part numbers.
(4) If, during maintenance, the default PFD configuration files are ever reloaded, these options must be
reactivated. See Sections 3.5.9, 3.5.10, 3.5.11, 3.5.12 and 3.5.13 respectively.
3.4.4 Configuration File Storage
The G1000 system is designed to store all configuration settings in various places so that the
configuration is retained in the aircraft during maintenance of units.
During system configuration, each file is sent directly to the applicable LRU where it is stored in local
LRU memory (except GRS 77 & GDC 74A). The PFD has a configuration module located in the
connector backshell (see Section 6.12) to store critical system settings such as system ID, calibration data,
and unlock options. If the PFD is replaced, all configuration files must be reloaded using an approved
loader card image and all unlock options reactivated.
NOTE
The GRS 77 AHRS and GMU 44 Magnetometer do not have a configuration file.
However, these LRUs do store calibration data acquired at initial installation or
replacement which are specific to the aircraft. Replacing these units or their mounting
hardware may require re-calibration. See Section 7.7.2 for more information on
re-calibration criteria.
Seitenansicht 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 265 266

Kommentare zu diesen Handbüchern

Keine Kommentare