Garmin Software Version 0321.23 Handbuch Seite 198

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 266
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 197
Page 6-4 G1000 System Maintenance Manual – Diamond DA40/40F
Revision G 190-00545-01
6.1 GDU 104X MFD & PFD
Removal:
1. Using a 3/32
nd
hex tool, rotate all four ¼-turn fasteners counter-clockwise until they reach their
stops.
2. Carefully remove the display from the panel.
3. While supporting the display, disconnect the connector.
Replacement:
1. Visually inspect the connector and pins for signs of damage. Repair any damage. While
supporting the display, connect the connector to the rear of the unit.
2. Carefully insert the display into the panel cutout, ensuring that all 4 ¼-turn fasteners align with
the corresponding holes.
3. Seat the display in the panel cutout. Do not use excessive force while inserting the display.
4. Once seated, rotate all four ¼-turn fasteners clockwise to lock the display to the panel.
5. Configure and test the MFD and/or PFD according to Section 7.1.
6.2 GMA 1347 Audio Panel
Removal:
1. Using a 3/32
nd
hex tool, turn the hex nut counter-clockwise until the GMA 1347 is unlocked
from its location.
2. Carefully remove the GMA 1347 from its rack.
Replacement:
1. Visually inspect the connectors using a flashlight to ensure there are no bent or damaged pins.
Repair any damage.
2. Gently insert the GMA 1347 into the rack until the locking tab engages the rack.
3. Begin to turn the hex nut clockwise. This draws the unit into the rack until seated. Do not
over-tighten the nut.
4. Configure and test the GMA 1347 according to Section 7.2.
6.3 GIA 63 (W) Integrated Avionics Units
Removal:
1. Remove the baggage compartment cover to gain access to the remote avionics enclosure.
2. Remove the remote avionics enclosure cover. Removal process is identical for GIA #1 or #2.
Remove and replace only one GIA 63 at a time.
3. Unlock the GIA 63 handle by loosening the Phillips screw on the handle.
4. Pull the handle upward to unlock the GIA 63. Gently remove the unit from the rack.
Seitenansicht 197
1 2 ... 193 194 195 196 197 198 199 200 201 202 203 ... 265 266

Kommentare zu diesen Handbüchern

Keine Kommentare