Garmin Software Version 0858.09 Bedienerhandbuch PDF herunterladen (Seite 70)

Page 8-4 G1000 System Maintenance Manual - Hawker Beechcraft G36

Rev. 5 190-01259-00

8.1.1 SVS / Pathways Installation Verification (REQUIRED IF ENABLED)

a. Apply power to the G1000 system. Allow the AHRS and magnetometer systems to

stabilize and align. Verify that air data information becomes valid on the PFD.

Check the MFD AUX – System Status page to verify GPS signals acquisition.

b. Press the ALERTS softkey on the PFD and verify no database, manifest, or

configuration errors exist.

c. Press the PFD softkey. Verify a SYN VIS softkey is shown in the lower left corner of

the display.

d. Press the SYN VIS softkey, then press the SYN TERR softkey to activate the

Synthetic Vision terrain display feature. Verify that the traditional blue/brown attitude

depiction is replaced with the Synthetic Vision rendering within 2-3 minutes of

activation. See figures below for reference.

e. Press the PFD softkey. Press the SYN VIS softkey and verify the following softkeys

are present and selectable:

• PATHWAY

• HRZN HDG

• APT SIGNS

Figure 8.5 – PFD Display without SVS enabled

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 78 79

Keine Kommentare

Garmin Software Version 0858.09 Bedienerhandbuch Seite 70