Garmin Software Version 0858.09 Bedienerhandbuch PDF herunterladen (Seite 50)

Page 5-2 G1000 System Maintenance Manual - Hawker Beechcraft G36

Rev. 5 190-01259-00

Table 5.2 – SVS Alert Messages

Failure Message Cause Solution

SVS – SVS DISABLED: Out of

available terrain region.

SVS is disabled because the

aircraft exceeded the

boundaries of the loaded terrain

database.

Geographical operation limitations

are defined in the SVS/Pathways

AFMS, which is referenced in Table

1.1.

Ensure that operations are within

this geographic area.

SVS – SVS DISABLED: Terrain

DB resolution too low

SVS is disabled because a 9

Arc-Second or better database

is not currently loaded.

Ensure the P/N 010-00330-43

Terrain Cards are installed in the

lower slot of each display.

If terrain data has been recently

updated, ensure that the correct 9

Arc-Second databases were used.

5.2 GTS 820 Troubleshooting

Problem Cause Solution

Unit does not power up – Data

failed message

Improper wiring; circuit breaker

open

Ensure power is properly wired to

the GTS 820 and the circuit

breaker is closed

Improper configuration

Verify using the USB install tool

that the GTS 820 is configured

correctly for the desired display

GTS 8XX Install Tool won’t

display any pages

Improper wiring; circuit breaker

open

Ensure USB is properly wired to

the GTS 820 and the circuit

breaker is closed

No Audio alerts

Improper wiring; Volume not set

correctly

Ensure the audio is properly

wired from the GTS 820 and

volume is not set too low

Calibration Fault Factory calibration invalid

If the unit fails to go into operate

mode then return to Garmin for

service

Configuration Fault

Both internal and external

configuration checks failed

Verify the configuration via the

GTS 8XX Install Tool.

Verify wiring to the configuration

module and replace if necessary.

FPGA Fault Internal Fault Return to Garmin for service

ROM Fault Internal Fault Return to Garmin for service

Execution Fault Internal Fault Return to Garmin for service

Electrical Fault Internal Fault Return to Garmin for service

Whisper Shout Fault Internal Fault Return to Garmin for service

Transmit Power Fault

Internal voltages are out of

tolerance

Verify input voltage and if it

continues return to Garmin for

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 78 79

Kommentare zu diesen Handbüchern

Keine Kommentare

Garmin Software Version 0858.09 Bedienerhandbuch Seite 50

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Navigatoren Garmin Software Version 0858.09