Garmin Software Version 0858.09 Bedienerhandbuch PDF herunterladen (Seite 31)

G1000 System Maintenance Manual - Hawker Beechcraft G36 Page 3-13

190-01259-00 Rev. 5

3.7.2 Base Configuration and Software Upload

a. Ensure loader card is inserted into top card slot of PFD. On PFD, select the System Upload

page using the PFD small FMS knob.

b. Activate the cursor and rotate the PFD small FMS knob to highlight BEECHCRAFT G36 in

the AIRFRAME field. Press the PFD ENT key to select the configuration .

c. Once an airframe type is selected the cursor moves to the FILE window. Rotate the PFD

small FMS knob to activate the drop-down menu. Move the cursor to highlight the

appropriate configuration for the aircraft and press ENT on PFD.

NOTE

The PRODUCT window displays information regarding each G1000

LRU. The LRU column depicts the reported software version of the

LRU, whereas the CARD VERS column shows the LRU software

version stored on the Loader Card. The SOFTWARE and

CONFIGURATION columns default to having all required boxes

checked. Each checked file is automatically loaded to the correct

G1000 LRU.

Figure 3.8 - Configuration/Software Load Page

d. Press the LOAD softkey.

e. Observe software loading progress and verify software load completes without errors as

indicated by the following:

f. Green PASS or White N/A in SOFTWARE and CONFIGURATION columns.

g. Upload Complete………….COMPLETE in the summary box.

h. Press PFD ENT key to acknowledge the Upload Complete box.

i. Press the UPDT CFG softkey on PFD and acknowledge prompt by pressing the ENT key on

PFD.

j. Proceed to the next section.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 78 79

Keine Kommentare

Garmin Software Version 0858.09 Bedienerhandbuch Seite 31