
Garmin G1000 Pilot’s Guide for Cessna Nav III190-00498-00 Rev. A
3-17
NAV/COM
AUTO-TUNING ON APPROACH ACTIVATION (NAV
FREQUENCIES)
NAV frequencies are automatically loaded into the NAV
Frequency window on approach activation, regardless of
the display unit being used.
NOTE: The primary NAV frequency becomes
auto-tuned upon loading an approach.
To auto-tune a NAV frequency if the desired
approach is not already loaded:
1. Press the
PROC
key to open the Procedures
window.
2. Turn the large
FMS
knob to highlight the
‘SELECT APPROACH’ menu option and press
the
ENT
key.
3. Use both the
FMS
knob and the
ENT
key as
needed to select the desired airport, VOR/ILS
approach and transition.
4. Turn the large
FMS
knob to highlight either the
‘LOAD?’ or ‘ACTIVATE?’ prompt and press the
ENT
key. The primary NAV frequency for the
activated approach is loaded into the standby
field of the selected NAV radio.
Figure 3-28 Selecting an Approach
Figure 3-29 Loading an Approach
Kommentare zu diesen Handbüchern