Garmin Legacy Software Versions Betriebsanweisung PDF herunterladen (Seite 72)

190-00498-00 Rev. AGarmin G1000 Pilot’s Guide for Cessna Nav III2-42

PRIMARY FLIGHT DISPLAY

Procedures Window

The Procedures Window is enabled/disabled by

pressing the PROC key. The following options are

available from the Procedures Window:

• Activate Vector-To-Final

• Activate Approach

• Select Approach

• Select Arrival

• Select Departure

Figure 2-65 Procedures Window

Select Approach

Select Approach allows the pilot to choose a published

instrument approach for the destination airport or replace

the current approach with a new selection.

To select an approach for a direct-to or

ﬂight plan destination airport:

1. From an active ﬂight plan, press the

PROC

key

to display the Procedures options window.

2. Turn the

large FMS

knob to highlight ‘Select

Approach’, then press the

ENT

key. A window

appears listing the available approaches for

the destination airport.

Figure 2-66 Approach

3. Turn the

FMS

knob to select the desired

approach, then press the

ENT

key. A window

appears listing the available transitions for the

approach.

Figure 2-67 Approach Transition

4. Turn the

FMS

knob to select the desired transi-

tion or vectors, then press the

ENT

key.

NOTE: The ‘Vectors’ option assumes that the pilot

will receive vectors from ATC to the ﬁnal course

segment of the approach.

Figure 2-68 Select Approach Window

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 363 364

Kommentare zu diesen Handbüchern

Keine Kommentare

Garmin Legacy Software Versions Betriebsanweisung Seite 72

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Navigatoren Garmin Legacy Software Versions