Garmin Legacy Software Versions Betriebsanweisung PDF herunterladen (Seite 67)

190-00498-00 Rev. A Garmin G1000 Pilot’s Guide for Cessna Nav III

2-37

PRIMARY FLIGHT DISPLAY

Activate Leg

Activate leg selects the highlighted leg as the “active leg”

(the ﬂight plan leg which is currently used for navigation

guidance).

To activate a ﬂight plan along a speciﬁc

leg:

1. From the active Flight Plan Window, press the

FMS

knob to activate the cursor, and turn the

large FMS

knob to highlight the desired desti-

nation waypoint.

2. Press the

key, highlight ‘Activate Leg’ and

press the

ENT

key. A conﬁrmation window is

displayed with ‘ACTIVATE’ highlighted. Press

the

ENT

key.

Figure 2-54 Activate Leg Conﬁrmation Window

Store Flight Plan

NOTE: The active ﬂight plan is erased when the

unit is turned off and when another ﬂight plan

is activated.

When storing ﬂight plans with an approach, departure,

or arrival, the G1000 uses the waypoint information from

the current database to deﬁne the waypoints. If the

navigation database is changed or updated, the G1000

automatically updates the information if the procedure has

not been modiﬁed. If an approach, departure, or arrival

procedure is no longer available, the ﬂight plan becomes

locked until the procedure is deleted from the ﬂight plan

or until the correct navigation database is installed.

To store a ﬂight plan:

1. From the Flight Plan Window, once all of the

waypoints have been entered, press the

key to display the page menu options.

2. Turn the

FMS

knob to select ‘Store Flight Plan’,

then press the

ENT

key. The Store Flight Plan

Window is displayed with ‘OK’ highlighted.

3. Press the

ENT

key to store the ﬂight plan.

4. To cancel, turn the

large FMS

knob to highlight

‘CANCEL’ and press the

ENT

key.

Figure 2-55 Page Options Menu

Invert Flight Plan

The Invert Flight Plan option reverses the active ﬂight

plan. After traveling along a ﬂight plan, the pilot may

wish to reverse the route for navigation back to the original

departure point.

To activate an existing ﬂight plan in

reverse:

1. From the Flight Plan Window, press the

key to display the page menu options.

2. Turn the

FMS

knob to highlight ‘Invert Flight

Plan’, then press the

ENT

key. The ﬂight plan

is now reversed and activated.

Figure 2-56 Invert Flight Plan Conﬁrmation Window

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 363 364

Kommentare zu diesen Handbüchern

Keine Kommentare

Garmin Legacy Software Versions Betriebsanweisung Seite 67

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Navigatoren Garmin Legacy Software Versions