Garmin Legacy Software Versions Betriebsanweisung PDF herunterladen (Seite 74)

190-00498-00 Rev. AGarmin G1000 Pilot’s Guide for Cessna Nav III2-44

PRIMARY FLIGHT DISPLAY

NOTE: When adding an arrival to an active ﬂight

plan, the pilot may need to remove a duplicate

destination waypoint from the ﬂight plan list.

Figure 2-72 Select Arrival Window

Select Departure

Select Departure allows the pilot to choose a published

standard instrument departure (SID) for the departure

airport, or replace the current departure with a new

selection. When using a direct-to, the G1000 uses the

nearest airport as a reference when displaying available

departures.

To select a departure for the departure

airport:

1. From an active ﬂight plan, press the

PROC

key

to display the Procedures options window.

2. Turn the

large FMS

knob to highlight ‘Select

Departure’, then press the

ENT

key. A window

appears listing the available departures for the

departure airport.

3. Turn the

FMS

knob to select the desired depar-

ture, then press the

ENT

key.

4. A window may appear listing runways for the

departure. Turn the

FMS

knob to select the

desired runway, then press the

ENT

key. The

transition window is now displayed.

NOTE: The runway window is not displayed for

every departure. ‘ALL’ may appear in the runway

ﬁeld, indicating that the departure procedure

applies to all runways. For airports with parallel

runways, ‘B’ may appear at the end of the runway

designation to indicate that the departure

procedure applies to both runways.

5. Turn the

FMS

knob to select the desired transi-

tion, then press the

ENT

key.

6. With ‘LOAD?’ highlighted, press the

ENT

key.

Activate Approach

Activate Approach allows the pilot to activate the

approach when ready to begin navigating the approach

course (cleared for the approach).

To activate the approach for a direct-to or

ﬂight plan destination airport:

1. From an active ﬂight plan, press the

PROC

key

to display the Procedures options window.

2. Turn the

large FMS

knob to highlight ‘Activate

Approach’, then press the

ENT

key.

Activate Vector-To-Final

Activate Vector-To-Final allows the pilot to activate the

ﬁnal course segment of the approach. This option assumes

that the pilot will receive vectors to the ﬁnal approach ﬁx

(FAF) and provides guidance to intercept the ﬁnal course,

before reaching the FAF.

To activate the approach with vectors to

ﬁnal:

1. From an active ﬂight plan, press the

PROC

key

to display the Procedures options window.

2. Turn the

FMS

knob to highlight ‘Activate Vector-

To-Final’, then press the

ENT

key.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 363 364

Kommentare zu diesen Handbüchern

Keine Kommentare

Garmin Legacy Software Versions Betriebsanweisung Seite 74

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Navigatoren Garmin Legacy Software Versions