Garmin Legacy Software Versions Betriebsanweisung Seite 85

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 364
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 84
Garmin G1000 Pilot’s Guide for Cessna Nav III190-00498-00 Rev. A
3-5
NAV/COM
RADIO INDICATORS
RX During COM signal reception, a white RX
appears by the active COM frequency.
TX During COM transmission, a white TX
appears by the active COM frequency replacing the
Frequency Transfer Arrow.
Figure 3-7 COM Radio Status Indications
ID When the Morse code identifier is ON for a
NAV radio, a white ID appears to the left of the
active NAV frequency.
Figure 3-8 ID Indication
The Morse code identifier is
ON for the GHM VOR.
VOLUME
Radio volume level can be adjusted from 0 to 100%
using the VOL/PUSH SQ knob for COM or VOL/PUSH
ID knob for NAV. Turning the knob clockwise increases
volume, counterclockwise decreases volume.
When adjusting, the level is displayed in place of the
standby frequencies. Volume level indication remains for
two seconds after the change.
Figure 3-9 COM and NAV Volume Levels
FREQUENCY TRANSFER ARROW
The Frequency Transfer Arrow is displayed between
the COM and NAV active and standby frequencies for
the active radio. Pressing the Frequency Transfer
key
toggles the frequencies. Pressing the small COM or
NAV knob transfers the frequency tuning box and the
Frequency Transfer Arrow between the radios.
NOTE: When a COM signal is received or
transmitted, the Frequency Transfer Arrow is
replaced by a white RX or TX
indication.
Pressing the COM Frequency Transfer
key toggles the COM frequencies.
Figure 3-10 Transferring COM and NAV Frequencies
Pressing the NAV Frequency Transfer
key toggles the NAV frequencies.
Seitenansicht 84
1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 363 364

Kommentare zu diesen Handbüchern

Keine Kommentare