Garmin GPS 500 Bedienungsanleitung Seite 117

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 256
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 116
GPS 500 Pilot’s Guide and Reference
6-19
SECTION 6
WPT PAGES
Figure 6-37 Reference Waypoint Field Highlighted
4) Use the small and large right knobs to enter
the identifier of the reference waypoint. The
reference waypoint can be an airport, VOR,
NDB, intersection, or another user waypoint.
Press the ENT Key to accept the selected
identifier.
5) The cursor moves to the radial (RAD) field
(Figure 6-38). Use the small and large right
knobs to enter the radial from the reference
waypoint to the new user waypoint. Press the
ENT Key to accept the selected radial.
Figure 6-38 Radial Field Selected
6) The cursor moves to the distance (DIS) field.
Use the small and large right knobs to enter
the distance from the reference waypoint to
the new user waypoint. Press the ENT Key to
accept the selected distance.
7) Turn the large right knob to highlight ‘Create?
and press the ENT Key.
8) Press the small right knob to remove the
flashing cursor.
NOTE: The GPS 500 allows the pilot to create
a new user waypoint at a defined radial and
distance from the present position. To reference
the present position, follow the preceding steps,
but press the CLR Key in Step 4. ‘P.POS’ appears
in the reference waypoint (REF WPT) field to
indicate that radial and distance information
references the present position. The second
reference waypoint field (REF WPT) is a temporary
reference only, not a reference that is stored with
the user waypoint. By default, this field displays
a radial from the nearest VOR. However, the pilot
can select any waypoint by identifier to use as
a reference in this field. The GPS 500 can store
user-defined waypoints which are generated
from other equipment in the panel. For example,
an EFIS equipped with joystick inputs can be used
to create user waypoints which (if the installation
supports this) automatically transfer to the GPS
500.
190-00181-60 Rev. G
Seitenansicht 116
1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 255 256

Kommentare zu diesen Handbüchern

Keine Kommentare