Garmin GPS 500 Bedienungsanleitung PDF herunterladen (Seite 160)

GPS 500 Pilot’s Guide and Reference

8-26

SECTION 8

AUX PAGES

Setting the local time:

1) Select ‘Date/Time’ from the Setup Page, using

the steps described at the beginning of this

section.

2) Turn the large right knob to highlight the time

offset ﬁeld (Figure 8-40).

Figure 8-40 Time Offset Field Selected

3) Use the small and large right knobs to enter

the desired offset, beginning by entering a

minus (-) or plus (+) sign to indicate whether

the offset is behind UTC or ahead of UTC. In

the United States, all local time offsets use

minus, or behind UTC.

4) Press the ENT Key to accept the selected

offset.

NOTE: When a local time offset is entered, only

‘Local 12 hour’ or ‘Local 24 hour’ can be selected.

The ‘UTC’ time format setting ignores any time

offset entry.

Setup Page: Display Backlight

Changing the backlighting intensity:

1) Select ‘Display Backlight’ from the Setup Page,

using the steps described at the beginning of

this section.

2) The ﬂashing cursor highlights the backlight

mode ﬁeld. Turn the small right knob to

select the desired mode: Auto or Manual

(Figure 8-41). Press the ENT Key to accept

the selection.

Figure 8-41 Backlight Mode Window

3) If ‘Manual’ is selected, the ﬂashing cursor

moves to the backlight level ﬁeld. Turn the

small right knob to select the desired level.

Press the ENT Key to accept the selection.

190-00181-60 Rev. G

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 255 256

Keine Kommentare

Garmin GPS 500 Bedienungsanleitung Seite 160