Garmin GPS 500 Bedienungsanleitung PDF herunterladen (Seite 62)

GPS 500 Pilot’s Guide and Reference

4-6

SECTION 4

FLIGHT PLANS

Flight Plan Catalog Options

The following options (some covered on the preceding

pages) are available for the Flight Plan Catalog Page:

• ‘Activate Flight Plan?’ - Allows the pilot to

select the ﬂight plan for navigation guidance, as

described previously in this section.

• ‘Invert & Activate FPL?’ - Allows the pilot to

reverse the highlighted ﬂight plan and select it for

navigation guidance, as described previously in

this section.

• ‘Create New Flight Plan?’ - Allows the pilot to

create a new ﬂight plan, as described previously in

this section.

• ‘Crossll?’ - Allows the pilot to transfer a Direct-to

destination, the active ﬂight plan, any stored ﬂight

plan or user waypoints to a second 400-Series or

500-Series Garmin unit. Some crossﬁll operations

can be done automatically. If both units are set

to ‘auto’, a change in the direct-to destination or

active ﬂight plan on one unit is seen on the other.

For additional information, see Section 8.2, Flight

Planning Page: Crossﬁll.

Crossﬁlling ﬂight plans between two 400-

or 500-Series Garmin units:

1) Select the ‘Crossﬁll?’ option from the Flight

Plan Catalog Page Menu (Figure 4-12) and

press the ENT Key.

2) Turn the large right knob to select the

‘Method’ ﬁeld (Figure 4-13).

3) Turn the small right knob to select ‘Auto’

or ‘Manual’ and press the ENT Key. ‘Auto’

automatically transfers the active ﬂight plan

or Direct-to selection to another 400- or 500-

series Garmin unit, without user intervention.

4) If ‘Manual’ is selected: Turn the large right

knob to select the ‘Transfer’ ﬁeld, then turn

the small right knob to select the type of

information to transfer between units (active

ﬂight plan, ﬂight plan, all user waypoints or

a single user waypoint). When ‘Flight Plan’

or ‘User Waypoint’ is selected, a second ﬁeld

appears to the immediate right of the ‘Transfer’

ﬁeld. Use the small and large right knobs to

enter the number of the ﬂight plan or the name

of the user waypoint to be transferred.

5) The ‘Cross-Side’ field allows the pilot to

designate the sending and receiving units

in a crossﬁll operation. Turn the large right

knob to select the ‘Cross-side’ ﬁeld, then turn

the small right knob to select ‘To’ or ‘From’

(Figure 4-14). Press the ENT Key to conﬁrm

the selection.

6) Turn the large right knob to highlight ‘Initiate

Transfer?’ (Figure 4-14) and press the ENT

Key. Once ‘Initiate Transfer?’ is selected,

a progress bar at the bottom of the page

indicates the status of the crossﬁll transfer until

completed.

Figure 4-14 Crossﬁll Page

190-00181-60 Rev. G

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 255 256

Kommentare zu diesen Handbüchern

Keine Kommentare

Garmin GPS 500 Bedienungsanleitung Seite 62

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Luftausrüstung Garmin GPS 500