Garmin GPS 500 Bedienungsanleitung PDF herunterladen (Seite 146)

GPS 500 Pilot’s Guide and Reference

8-12

SECTION 8

AUX PAGES

If a ‘WARN’ annunciation appears at the bottom

left corner, GPS satellite coverage may be

sufﬁcient, but the GPS 500 has detected a position

error which exceeds protection limits. In this

condition, all GPS navigation data on the GPS 500

is disabled. Use an alternate navigation source.

• Software Versions - Provides software version

information for the operating software within the

GPS receiver, and main processor board.

• Database Versions - Displays the current Jeppesen

database type and expiration date, along with the

version and type of built-in land database.

• Terrain Database Versions - Displays the current

version and area of coverage of each terrain and

obstacle database. If a database is found to be

missing and/or decient, the TAWS system fails

the self-test and issues a failure message.

Utility Page: Checklists

Creating a checklist:

1) Select ‘Checklist’ from the Utility Page using

the steps described at the beginning of this

section (8.3). Press the ENT Key to display a

list of checklists.

2) Press the MENU Key to display the Checklist

Page Menu (Figure 8-18). Turn the large right

knob to select ‘Create New Checklist?’ and

press the ENT Key.

Figure 8-18 Checklist Page Menu

3) Use the small and large right knobs to enter

the name of a checklist. Press the ENT Key

when ﬁnished. (Up to nine different checklists

can be created and stored in the GPS 500.)

4) Use the small and large right knobs to enter

each checklist item, followed each time by the

ENT Key. Each checklist may contain up to 30

line items of as much as 16 characters long.

190-00181-60 Rev. G

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 255 256

Keine Kommentare

Garmin GPS 500 Bedienungsanleitung Seite 146