
Garmin G1000 Cockpit Reference Guide for the Cessna 350/400
190-00567-01 Rev. B
SECTION 7 – NAVIGATION
7-4
Enter a Direct-to Destination
1)
Press the Direct-to Key
( )
.
2)
Turn the large
FMS
Knob to place the cursor in the
desired selection field.
3)
Turn the small
FMS
Knob to begin selecting the
desired identifier, location, etc.
4)
Press the
ENT
Key.
5)
The cursor is now flashing on ‘ACTIVATE?’. If no
altitude constraint or course is desired, press the
ENT
Key to activate. To enter an altitude contraint,
proceed to step 6.
6)
Turn the large
FMS
Knob to place the cursor over
the ‘VNV’ altitude field.
7)
Turn the small
FMS
Knob to enter the desired VNV
altitude.
8)
Press the
ENT
Key. The option to select ‘MSL’ or
‘AGL’ is now displayed.
9)
Turn the small
FMS
Knob to select ‘MSL’ or ‘AGL’.
10)
Press the
ENT
Key. The cursor is placed in the ‘VNV’
offset distance field.
11)
Turn the small
FMS
Knob to enter the desired target
altitude offset from the selected Direct-to.
12)
Press the
ENT
Key to highlight ‘Activate?’ or turn the
large
FMS
Knob to highlight the ‘COURSE’ field.
13)
Turn the small
FMS
Knob to enter the desired course
to the waypoint.
14)
Press the
ENT
Key to highlight ‘ACTIVATE?’.
15)
Press the
ENT
again to activate the Direct-to.
Select a Direct-to Destination to a Flight Plan
Waypoint
1)
While navigating an active flight plan, press the
Direct-to
( )
Key.
2)
Turn the small
FMS
Knob to the left to display a list
of flight plan waypoints as shown in Figure 7-8.
Figure 7-8 Flight Plan Waypoint List (PFD)
3)
Turn the large
FMS
Knob to select the desired
waypoint.
4)
Press the
ENT
Key. The cursor is now displayed on
‘ACTIVATE?’.
5)
Press
ENT
again to activate a Direct-to.
Select a Direct-to Destination to a Nearest
Airport
1)
Press the
Direct-to
( )
Key.
2)
Turn the small
FMS
Knob to the left. Initially, a
flight plan waypoint list is displayed as in Figure
7-8. The list is only populated when navigating a
flight plan.
Figure 7-9 Nearest Airport List (PFD)
Kommentare zu diesen Handbüchern