
Garmin G1000 Cockpit Reference Guide for the Socata TBM 850
190-00708-00 Rev. A
13-9
SECTION 13 – ANNUNCIATIONS
& ALERTS
System Annunciation Comment
Display is not receiving valid heading input from AHRS.
Display is not receiving valid transponder information.
Other Various Red X Indications
A red ‘X’ through any other display field, such as engine instrumentation
fields, indicates that the field is not receiving valid data.
MFD & PFD Message Advisories
Message Comments
DATA LOST
– Pilot stored data was
lost. Recheck settings.
The pilot profile data was lost. System reverts to default pilot profile and settings.
The pilot may reconfigure the MFD & PFDs with preferred settings, if desired.
XTALK ERROR
– A flight display
crosstalk error has occurred.
The MFD and PFDs are not communicating with each other. The G1000 system
should be serviced.
PFD1 SERVICE
– PFD1 needs service.
Return unit for repair.
The PFD and/or MFD self-test has detected a problem. The G1000 system should
be serviced.
PFD2 SERVICE
– PFD2 needs service.
Return unit for repair.
MFD1 SERVICE
– MFD1 needs
service. Return unit for repair.
MANIFEST
– PFD1 software
mismatch, communication halted.
The PFD and/or MFD has incorrect software installed. The G1000 system should
be serviced.
MANIFEST
– PFD2 software
mismatch, communication halted.
MANIFEST
– MFD1 software
mismatch, communication halted.
PFD1 CONFIG
– PFD1 config error.
Config service req’d.
The PFD configuration settings do not match backup configuration memory. The
G1000 system should be serviced.
PFD2 CONFIG
– PFD2 config error.
Config service req’d.
MFD1 CONFIG
– MFD1 config error.
Config service req’d.
The MFD configuration settings do not match backup configuration memory. The
G1000 system should be serviced.
SW MISMATCH
– GDU software
version mismatch. Xtalk is off.
The MFD and PFDs have different software versions installed. The G1000 system
should be serviced.
Kommentare zu diesen Handbüchern