Garmin Software Version 0719.00 Betriebsanweisung Seite 113

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 228
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 112
Garmin G1000 Cockpit Reference Guide for the Socata TBM 850
190-00708-00 Rev. A
SECTION 7 – NAVIGATION
7-9
l)
V4 is now loaded into the flight plan as shown in
Figure 7-19.
Figure 7-19 V4 is Loaded in the Flight Plan
5)
V4 is now made the active leg of the flight plan.
a)
Press the FMS Knob to activate the cursor.
b)
Turn the large FMS Knob to highlight SLN. The TO
waypoint of the leg is selected in order to activate
the leg.
c)
Select the ACT LEG Softkey. The confirmation
window is now displayed as in Figure 7-20. Note
the TOP to SLN leg is actually part of V4.
Figure 7-20 Comfirm Active Leg
d)
Verify the displayed leg is the desired leg and press
the ENT Key. Note in Figure 7-21, the magenta
arrow in the flight plan window and magenta line
on the map indicating V4 is now the active flight
plan leg. Note also, the crosstrack (XTK) distance
on the HSI indicating 16.9 nm to the intercept
point. Note the phase of flight remained in Terminal
(TERM) mode up to this point because a departure
leg was active. Since a leg after the departure is
now active, the current CDI flight phase is ENR
(Enroute) and CDI scaling has changed to 2.0
nm.
Figure 7-21 V4 Now Active Leg
6)
The aircraft continues on heading 290º. When the
crosstrack distance is less than 2.0 nm, the XTK
disappears from the HSI and the CDI is positioned
Seitenansicht 112
1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 227 228

Kommentare zu diesen Handbüchern

Keine Kommentare