
Garmin G1000 Cockpit Reference Guide for the DA42
190-00406-05 Rev. B
2-8
SECTION 2
FLIGHT INSTRUMENTS
Distance to
Bearing Source
Waypoint
Identifier
Bearing
Source
Pointer
Icon
Figure 2-17 BRG1 Information Window
Distance to
Bearing Source
Waypoint
Identifier
Pointer
Icon
Bearing
Source
Figure 2-18 BRG2 Information Window
DME (optional)
To display the DME Information Window, press the
PFD Softkey followed by the DME Softkey.
Figure 2-19 DME Information Window
Navigation Source
Change Navigation Sources
1) Press the CDI Softkey to change from GPS to
VOR1/LOC1.
2) Press the CDI Softkey again to change from
VOR1/LOC1 to VOR2/LOC2.
3) Press the
CDI
Softkey a third time to return to
GPS.
• INTEG – GPS information is either not present or
is invalid for navigation use
• WARN – GPS detects a position error
• SUSP – Displayed when in OBS Mode indicating
GPS waypoint sequencing is suspended.
Figure 2-20 GPS INTEG, GPS SUSP, LOC1 and VOR2
Enable/disable OBS Mode While Navigating
with GPS
1) Press the
OBS Softkey to select OBS Mode.
2) Turn the CRS Knob to select the desired course
TO/FROM the waypoint.
3) Press the OBS Softkey again to return to
normal operation.
NOTE: The OBS Softkey is only displayed when
navigating an active leg using GPS.
Kommentare zu diesen Handbüchern