
Garmin G1000 Cockpit Reference Guide for the DA40/40F
190-00324-11 Rev. C
48
Hazard Avoidance
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
WORLDWIDE WEATHER (OPTIONAL)
NOTE: Garmin Flight Data Services Worldwide Weather provides information
for avoiding hazardous weather. Do not utilize Worldwide Weather informa-
tion to penetrate hazardous weather.
Weather data are provided when the pilot initiates either a manual or automatic
GFDS data request on the GFDS Weather Data Link Page on the MFD. No weather
data is displayed until the first GFDS Weather Data Request is made.
Registering with Garmin Flight Data Services
A subscriber account must be established prior to receiving Worldwide Weather
products. Contact Garmin Flight Data Services at 1-866-739-5687 in the United
States or 913-397-8200, ext. 1135.
After a subscriber account has been established, the system must be registered for
data link features such as reporting services or GFDS Worldwide Weather. Registration
is accomplished by entering the required access code. This process is only performed
when initially setting up the system for GFDS services.
Registering the system for data link services
1)
With the aircraft outside and having a clear view of the sky, turn the large
FMS Knob on the MFD to select the AUX page group.
2)
Turn the small FMS Knob to select the AUX-SYSTEM STATUS. Note the
System ID number in the AIRFRAME field.
3)
Turn the large FMS Knob to select the MAP Page group.
4)
Turn the small FMS Knob to select the MAP-WEATHER DATA LINK Page.
5)
Press the MENU Key. If necessary, select ‘Display GFDS Weather’.
6)
Press ENT Key. The ‘GARMIN FLIGHT DATA SERVICE REGISTRATION’
Window is now displayed.
7)
Press the MENU Key. The Page Menu window is now displayed.
8)
Using the FMS Knob enter the access code obtained from Garmin Flight
Data Services in the ACCESS CODE field.
9)
Press the ENT Key. REGISTER will now be highlighted.
10)
Press the ENT Key. System registration is complete when ‘REGISTERED’ is
displayed in the STATUS field.
Kommentare zu diesen Handbüchern