
Garmin G1000 Cockpit Reference Guide for the DA40/40F
190-00324-11 Rev. C 85
Additional Features
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
Immediately Accessing Emergency Procedures
1)
From any page on the MFD, press the CHKLIST Softkey.
2)
Press the EMERGCY Softkey.
3)
Turn the FMS Knob to select the desired emergency checklist and press the
ENT Key.
4)
Press the ENT Key or CHECK Softkey to check the selected emergency
checklist item. The line item turns green and a checkmark is placed in the
box next to it. The next line item is automatically highlighted for checking.
Either FMS Knob can be used to scroll through the checklist and select the
desired checklist item.
Press the CLR Key or UNCHECK Softkey to remove a check mark from an
item.
5)
When all checklist items have been checked, ‘*Checklist Finished*’ is
displayed in green text at the bottom left of the checklist window. If all
items in the checklist have not been checked, ‘*CHECKLIST NOT FINISHED*’
will be displayed in yellow text.
6)
Press the ENT Key. ‘GO TO NEXT CHECKLIST?’ will be highlighted by the
cursor.
7)
Press the ENT Key to advance to the next checklist.
8)
Press the RETURN Softkey to return to the previous checklist.
9)
Press the EXIT Softkey to exit the Checklist Page and return to the page
last viewed.
ELECTRONIC STABILITY AND PROTECTION (ESP
™
) (OPTIONAL)
The pilot can interrupt ESP
™
by pressing and holding the Autopilot Disconnect (AP
DISC) switch. Upon releasing the or AP DISC switch, ESP
™
force will again be ap-
plied, provided aircraft roll attitude is within engagement limits. ESP
™
can also be over-
ridden by overpowering the servo’s mechanical torque limit.
ESP
™
can be enabled or disabled on the AUX-SYSTEM SETUP 2 Page on the MFD.
To enable or disable ESP
™
:
1) Turn the large
FMS
Knob to select the AUX Page Group.
2) Turn the small
FMS
Knob to select the System Setup Page.
3) If necessary, select the
SETUP 2
Softkey to display the AUX-SYSTEM SETUP 2
Page. If the AUX-SYSTEM SETUP 2 is already displayed, proceed to step 4.
Kommentare zu diesen Handbüchern