Garmin 2006T Betriebsanweisung PDF herunterladen (Seite 65)

190-01146-00 Rev. A

Garmin G950 Pilot’s Guide for the Tecnam P2006T

FLIGHT INSTRUMENTS

SYSTEM

OVERVIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO PANEL

& CNS

FLIGHT

MANAGEMENT

HAZARD

AVOIDANCE

AFCS

ADDITIONAL

FEATURES

APPENDICES INDEX

A Baro Transition Alert is provided to notify the pilot to change the barometric pressure setting when crossing

the baro transition altitude. If the aircraft is at least 500 feet below the transition altitude and then climbs

through this altitude and the STD BARO Softkey has not been pressed, the barometric pressure setting ﬂashes

in light blue until the pressure setting is changed. If the aircraft is at least 500 feet above the transition altitude

and then descends through this altitude and the barometric pressure setting has not been changed from STD

BARO, the setting ﬂashes in light blue until it is changed (Figure 2-12).

Setting the Baro Transition Alert:

1) Use the FMS Knob to select the AUX - System Setup Page.

2) Press the FMS Knob to activate the cursor.

3) Turn the large FMS Knob to highlight ‘OFF or ON’ in the ‘BARO TRANSITION ALERT’ box.

4) Turn the small FMS Knob to turn the alert OFF or ON and press the ENT Key.

5) With the altitude ﬁeld highlighted, turn the small FMS Knob to select the desired altitude and press the ENT

Key.

6) To cancel the selection, press the FMS Knob.

Figure 2-12 Baro Transition Alert

(AUX - System Setup Page)

Pressure setting ﬂashes during climb above

transition altitude if the STD BARO Softkey

has not been pressed.

Pressure setting ﬂashes during descent below

transition altitude to indicate setting has not

been changed from STD BARO.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 347 348

Keine Kommentare

Garmin 2006T Betriebsanweisung Seite 65