Garmin B4 Bedienerhandbuch Seite 65

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 82
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 64
Instructions for Continued Airworthiness 190-01527-15 Rev 1
for the Garmin G500H Installation in Eurocopter EC130 Page 65 of 82
Alert Text
Cause
Solution
FAN 2 FAIL
Fan 2 has reported 0 RPM when it
was powered with a PWM duty
cycle higher than or equal to 10%
Inspect the GDU fan for an obstruction.
Contact Garmin Technical Support.
GDL69 CONFIG The GDL 69 configuration
information stored in the GDL 69
and the GDU 620 configuration
module do not match.
With the GDU 620 in configuration mode,
go to the GDL 69 page in the GDL page
group. Verify that the SET and ACTIVE
configuration settings are the same. If
not, use the SET>ACTV soft key to copy
the configuration settings from the GDU
620 into the GDL 69.
The GDL 69 configuration was
updated using another LRU
(e.g. the GMX 200 or 400W/500W).
Update the GDL 69 configuration using
the GDU 620.
GDU CONFIG This error appears whenever the
GDU is replaced with a GDU that
was configured for a different
installation.
Cycle power to the GDU. This error
automatically clears on the second power
up with a different configuration module.
Error in the configuration of the
GDU 620.
GDU (1/2) COOLING Specific GDU has poor cooling, and
power usage is being reduced.
Ensure fans on indicated GDU are
functioning
Ensure fans on indicated GDU are not
obstructed
GDU (1/2) DB ERR Error in specific database, where
GDU (1/2) DB denotes specific
database.
Verify the correct card is installed, reload
the DB on the card.
GDU (1/2) VOLTAGE GDU supply voltage is below 12
VDC.
Increase the voltage above 12VDC.
GEO LIMITS Location is too far north/south for
GRS 77H magnetic compass.
GPS(1/2) FAIL No GPS1 or GPS2 data is available.
Ensure GPS (1/2) is turned on
Verify RS-232 wiring from the GPS to the
GDU 620.
31-00-00
Seitenansicht 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 81 82

Kommentare zu diesen Handbüchern

Keine Kommentare