Garmin B4 Bedienerhandbuch PDF herunterladen (Seite 23)

Instructions for Continued Airworthiness 190-01527-15 Rev 1

for the Garmin G500H Installation in Eurocopter EC130 Page 23 of 82

e) Terminal Block Installation

Terminal Block is located underneath the cabin floor between station 1703 and 1766 on

the left side of the aircraft. (Figure 6-05)

Access Methods

i. Removal

1. Un-latch the Center lower belly access panel.

2. Disconnect the retaining straps that prevent the panel from falling to the floor.

3. If aftermarket items are attached to the Center lower belly panel it may be

necessary to remove or disconnect them in order to remove the lower belly panel.

Consult the manufacturers Installation and Removal instructions for proper

removal of items.

ii. Installation

1. Re-install aftermarket items if removed to gain access to the terminal block.

Consult the manufacturers Installation and Removal instructions for proper

installation of items.

2. Connect the retaining strap that was disconnected to gain access to the terminal

block.

3. Close the Center lower belly access panel and latch it.

Caution: Use of power tools during removal or installation

of panels and attaching hardware may damage nut plates

or deform holes in composite doors, covers, panels, and

fairings.

06-00-00

Figure 6-05

Terminal

Block

STA

1703

REF

STA

1766

REF

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 81 82

Keine Kommentare

Garmin B4 Bedienerhandbuch Seite 23