Garmin GPSMAP 4212 Bedienungsanleitung PDF herunterladen (Seite 7)

GPSMAP 4000 Series Owner’s Manual 3

Getting Started

GettinG

Started

Acquiring GPS Satellite Signals

When you turn on the chartplotter, the GPS receiver must collect satellite data and establish its

current location. When the chartplotter acquires satellite signals, the signal strength bars at the top

of the Home screen are green . When the chartplotter loses satellite signals, the green bars

disappear and a ashing question mark appears on the boat icon on the Chart screen.

For more information about GPS, visit the Garmin Web site at www.garmin.com/aboutGPS.

Adjusting the Backlight

1. While the chartplotter is on, press and quickly release the Power key.

2. Select Backlight.

3. Select an option to adjust the backlight:

To allow the chartplotter to automatically adjust the backlight based on ambient light, select

Auto.

To manually adjust the backlight, select Up or Down, or use the Rocker.

Adjusting the Color Mode

1. Press and quickly release the Power key.

2. Select Color Mode.

3. Select Day Colors, Night Colors, or Auto.

Inserting and Removing SD Cards

Your chartplotter supports Secure Digital (SD) cards. Insert optional BlueChart

g2 Vision

cards to view high-resolution satellite imagery and aerial reference photos of ports, harbors, marinas,

and other points of interest. Insert blank SD cards to transfer data such as waypoints, routes, and

tracks to another compatible Garmin device or a computer. The SD card slot is located on the

bottom-right corner of the chartplotter.

To insert the SD card, open the access door and press the SD card in until it clicks.

To eject the SD card, press the card in again and release it.

•

1 2 3 4 5 6 7 8 9 10 11 12 ... 83 84

Keine Kommentare

Garmin GPSMAP 4212 Bedienungsanleitung Seite 7