Garmin GPSMAP 4212 Bedienungsanleitung PDF herunterladen (Seite 6)

2 GPSMAP 4000 Series Owner’s Manual

Getting Started

GettinG

Started

Turning on the Chartplotter

NOTE: The rst time you power on your chartplotter, you must go through a setup sequence. See

“Initializing Chartplotter Settings” (page 2).

1. Press and release the Power key. After a few moments, the Warning screen appears.

Warning Screen Home Screen

2. Press SELECT to open the Home screen.

Turning Off the Chartplotter

Press and hold the Power key.

Initializing Chartplotter Settings

The rst time you turn on your chartplotter, you must congure a series of initial settings. These

settings must also be congured when restoring original factory settings (page 4). All of these

settings can be congured later from the Congure screen (page 35).

The initial settings are as follows:

Language—select the language that will be shown on your screen.

Welcome—select OK.

Position Format—specify the coordinate system to use for location readings.

Time Format—select 12-hour, 24-hour, or UTC (Universal Time Code) to specify the format

in which time is displayed.

Time Zone—select your time zone.

Units—select Statute, Metric, or Nautical to specify units for onscreen measurements.

Minimum Safe Depth—specify the minimum safe depth for your boat. Refer to your boat

specications for more information.

Minimum Overhead Clearance—specify the minimum overhead clearance for your boat. Refer

to your boat specications for more information.

•

1 2 3 4 5 6 7 8 9 10 11 ... 83 84

Keine Kommentare

Garmin GPSMAP 4212 Bedienungsanleitung Seite 6