Garmin GPSMAP 4212 Bedienungsanleitung PDF herunterladen (Seite 37)

GPSMAP 4000 Series Owner’s Manual 33

Viewing Information

VieWinG

information

Viewing Engine Gauges

NOTE: You must be connected to a NMEA 2000 network capable of sensing engine data in order to

view the gauges. See the GPSMAP 4000/5000 Series Installation Instructions for details.

From the Home screen, select Information > Engine.

To select analog or digital gauges:

NOTE: For more than two engines, you can use only the digital gauges. For one or two engines, you

can switch between analog and digital gauges.

1. From the Home screen, select Information > Dashboard Gauges > Engine and then press

MENU.

2. Select Digital or Analog.

Viewing Fuel Gauges

NOTE: To view fuel information, your chartplotter must be connected to an external fuel sensor, such as

the Garmin GFS

™

10.

From the Home screen, select Information > Dashboard Gauges > Fuel. Fuel ow for each

engine, total fuel ow, fuel level in each tank, total fuel remaining, fuel economy, engine trim, boat

speed, engine RPM, and the range for your boat are displayed.

To synchronize your fuel gauges with your fuel:

1. From the Home screen, select Information > Dashboard Gauges > Fuel.

2. Press MENU.

3. Select an option:

Fill Up All Tanks—select when your tank is full. An estimate of the total fuel is shown. Adjust

if necessary.

Add Fuel To Boat—select when you have added less than a full tank. An estimate of the fuel

added is shown. Adjust if necessary.

Set Total Fuel Onboard—select to specify the total fuel in your tanks.

Fuel Economy—select either GPS Speed or Water Speed (using data from a speed wheel)

for the fuel economy calculation.

•

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 83 84

Keine Kommentare

Garmin GPSMAP 4212 Bedienungsanleitung Seite 37