Garmin B4 Bedienerhandbuch PDF herunterladen (Seite 29)

Instructions for Continued Airworthiness 190-01527-15 Rev 1

for the Garmin G500H Installation in Eurocopter EC130 Page 29 of 82

E.F.I.S. Circuit Breaker Installation

Circuit Breaker Installation requires one (1) placard that is mounted to the top of the lower pedestal

with three .50 in diameter hole cut-outs in the middle so the circuit breakers can stick through the

placard.

2. Decal and Placard Application

a) Wipe the surface area with isopropyl alcohol or acetone to thoroughly clean, before

applying the decal or placard. Allow cleaned area to dry. Separate backing from adhesive

side of decal and apply to cleaned, dry surface. Roll out all wrinkles.

b) Mask around edges, where practical, (do not put tape on decal surface) with masking tape.

Seal edges of placard or decal with 3M #3950 Edge Sealer. Remove any masking tape after

1-2 minutes.

11-00-00

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 81 82

Keine Kommentare

Garmin B4 Bedienerhandbuch Seite 29