Garmin GPS 65 Bedienungsanleitung PDF herunterladen (Seite 46)

reference the automatically calculated magnetic variation shown. For

mostapplications, the “Auto Mag” feature will provide accurate heading

information. If the auto-magnetic variation is not correct, you may

define the magnetic variation by selecting “User Mag Var”. If the “User

Mag Var” option is selected, the ms^etic variation is then entered.

To enter a user-defined magnetic variation«.

• Highlight the “HDG” field and select “User Mag Var” with CLR.

• Press ENT.

• The variation direction is h^hlighted. To change the direction,

press CLR.

• Press ENT.

• Ebiter the variation degrees and press ENT.

6.4 ALARMS AND CDl SETUP

---------

AlAftHf / m

-------------

Rnchor: 0. 10!ïk ^on

Arrival: 0.5^ »-on

Clock: 00:00

CDI Scale »1.00

Steer To ^center

From the Alarms/CDI Page,youmay

define three alarms (and turn them

on or off) and configure the graphic

GDI to your preference. Alarms are

available for anchor drift, arrival at

a deriination waypoint, and an alarm

clock.

To set the anchor alarm.

■ ffighlight the anchor alarm distance and enter the marimum

allowable drift. CAUTION: Setting the anchor alarm to its

smallest value (.01 unit) may result in a &lse alarm. Please note

that under certain circumstances (below average satellite

geometry, degraded reception, etc.) the position error of the GPS

65 may be greater than the lowest scale settings available for this

alarm.

• Press ENT.

• The on/off <yclic field is hi^ilighted. Ifthe alarm is not turned on,

press CLR.

To set the arrival alarm«.

• Highlit the arrival alarm distance and enter the distance from

a destination at which you want the alarm to sound.

6-4

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare

Garmin GPS 65 Bedienungsanleitung Seite 46

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für GPS-Empfänger Garmin GPS 65