Garmin GPS 65 Bedienungsanleitung PDF herunterladen (Seite 15)

CHAPTERS

BASIC OPERATION

3.1 POWER ON

After you turn your GPS 65 on. It will conduct a series of self tests and

display the following notice:

Welcome to GHRnXN's

GPS 65

Globali HciMÌgcitor

SOFTHARE UER$I«H1.24

COmiGHT 1992

CftRHIM OORF

Following completion of the tests, the Satellite Bar Graph Page (see

Section 3.2) will be displayed, and the GPS 65 will begin acquiring

satellites.

After a position is found (and if no keys have been pressed), the Position

Page (see Section 3.3) will be displayed, and the unit is ready for normal

operation.

When four or more satellites with good geometry are available, the GPS

65 will automatically operate in the 3D mode in which latitude,

longitude, and altitude are computed. If only three satellites are

available, the unit will operate in 2D mode in which only latitude and

longitude are computed. When operating in the 2D mode, the emit will

use the last computed altitude or your last entered altitude. (Section 3.3

describes how you may enter the altitude.)

Your GPS 65 will automatically update satellite orbital data as it

operates. If you have not operated your unit for a period of six months

or longer, it vrill take approximately 15 minutes to search Uie sky and

collect new orbital data. You will be informed when your unit is

searchii^ the sliy with the message “Searching (he Sky." Once satellite

orbital data is collected, it will be stored in memory. The memory is

maintained by an internal battery, therefore the data will not be lost

when you turn your GPS 65 off.

3-1

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 75 76

Keine Kommentare

Garmin GPS 65 Bedienungsanleitung Seite 15