
Garmin G1000 Cockpit Reference Guide for the Piper PA-44-180 Seminole
190-01462-01 Rev. A 101
Annunciations & Alerts
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
Message Comments
SLCT NAV
– Select NAV on CDI for
approach.
The system notifies the pilot to set the CDI to
the correct NAV receiver. Set the CDI to the
correct NAV receiver.
PTK FAIL
– Parallel track
unavailable: bad geometry.
Bad parallel track geometry.
PTK FAIL
– Parallel track
unavailable: past IAF.
IAF waypoint for parallel offset has been
passed.
PTK FAIL
– Parallel track
unavailable: past IAF.
IAF waypoint for parallel offset has been
passed.
NON WGS84 WPT
– Do not use
GPS for navigation to [xxxx]
The position of the selected waypoint [xxxx]
is not calculated based on the WGS84 map
reference datum and may be positioned in error
as displayed. Do not use GPS to navigate to
the selected non-WGS84 waypoint.
STRMSCP FAIL
– Stormscope has
failed.
Stormscope has failed. The G1000 system
should be serviced.
UNABLE V WPT
– Can’t reach
current vertical waypoint.
The current vertical waypoint can not be
reached within the maximum flight path angle
and vertical speed constraints. The system
automatically transitions to the next vertical
waypoint.
VNV
– Unavailable. Excessive track
angle error.
The current track angle error exceeds the limit,
causing the vertical deviation to go invalid.
VNV
– Unavailable. Unsupported
leg type in flight plan.
The lateral flight plan contains a procedure
turn, vector, or other unsupported leg type
prior to the active vertical waypoint. This
prevents vertical guidance to the active vertical
waypoint.
VNV
– Unavailable. Excessive
crosstrack error.
The current crosstrack exceeds the limit, causing
vertical deviation to go invalid.
VNV
– Unavailable. Parallel course
selected.
A parallel course has been selected, causing the
vertical deviation to go invalid.
Kommentare zu diesen Handbüchern