Garmin Software Version 1578.01 Betriebsanweisung Seite 139

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 150
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 138
Garmin G1000 Cockpit Reference Guide for the Piper PA-34-220T Seneca
190-01405-00 Rev. A
Appendix
121
Flight
Instruments EIS
Nav/Com/
XPDR/Audio GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
Loading Garmin Database Updates
Updating Basemap, SafeTaxi, Airport Terrain, Obstacle, and Airport
Directory Databases
These databases may be copied to one Supplemental Data Card, then automatically
synchronized to other card in the system:
1)
With system power OFF, remove the MFD database card from the bottom
card slot of the MFD.
2)
Update the basemap, SafeTaxi, airport terrain, obstacle and/or airport
directory databases on the MFD card.
3)
Insert the MFD database card into the bottom card slot of the MFD.
4)
Apply power to the system, check that the databases are initialized and
displayed on the power-up screen. If a ‘Verifying’ message is seen, wait for
the system to finish loading before proceeding to step 5.
5)
Acknowledge the Power-up Page agreement by pressing the ENT Key or
the right most softkey.
6)
Turn the large FMS Knob to select the AUX Page group on the MFD.
7)
Turn the small FMS Knob to select the System Status Page.
8)
Monitor the Sync Status in the Database Window. Wait for all databases to
complete synching, indicated by ‘Complete’ being displayed.
9)
Remove and reapply power to the system.
10)
Turn the large FMS Knob to select the AUX Page group on the MFD.
11)
Turn the small FMS Knob to select the System Status Page.
12)
Press the Display Database Selection Softkey to show database information
for each display (MFD1 DB, PFD1 DB, or PFD2 DB). Verify the correct
database cycle information is shown for each database for each display.
Updating Terrain, FliteCharts, and ChartView Databases
1)
With system power OFF, remove the Supplemental Data Card from the
bottom card slot of the MFD and both PFDs.
2)
Copy the updated terrain database to both Supplemental Data Cards. Copy
the updated FliteCharts or ChartView database to one Supplemental Data
Card.
Seitenansicht 138
1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 149 150

Kommentare zu diesen Handbüchern

Keine Kommentare