Garmin Software Version 0648.02 Betriebsanweisung Seite 105

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 142
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 104
Garmin G1000 Cockpit Reference Guide for the Piper PA32
10-7
SECTION 10 – HAZARD
AVOIDANCE
10.4 TRAFFIC INFORMATION SERVICE (TIS)
NOTE: If the G1000 is configured to use the
optional SkyWatch Traffic Advisory System, TIS
will not be available for use.
NOTE: Traffic Information Service (TIS) is only
available when the aircraft is within the service
volume of a TIS capable terminal radar site.
Displaying Traffic on the Traffic Map Page
1)
Turn the large
FMS
Knob to select the Map Page
Group.
2)
Turn the small
FMS
Knob to select the Traffic Map
Page.
3)
Press the
OPERATE
Softkey to begin displaying
traffic. ‘TIS OPERATIING’ is displayed in the Traffic
Mode field.
4)
Press the
STANDBY
Softkey to place the system
in the Standby Mode. ‘TIS STANDBY’ will be
displayed in the Traffic Mode field.
5)
Rotate the
Joystick
clockwise to display a larger
area or rotate counter-clockwise to display a
smaller area.
If data is not received for a period longer than 6
seconds, the age of the present data will be displayed in
the lower left of the screen along with the annuciation
that the system has entered Coast Mode. The system
will maintain the traffic display (up to 60 seconds) until
the next data reception. If no data is received after 60
seconds, traffic will be removed from the display.
Traffic out of
range
ProximityTraffic 1200’ above
& descending, moving in the
direction of the line
Traffic Mode
Figure 10-11 Traffic Map Page
Traffic at same altitude,
level flight & moving in the
direction of the line
Traffic Advisory, aircraft is 1200’
above & climbing, moving in the
direction of the line
Last data update
is older than 6
sec. resulting in
Coast Mode
TNA Mute
Status
Displaying Traffic on the Navigation Map
1)
Ensure TIS is operating. With the Navigation Map
displayed, press the
MAP
Softkey.
2)
Press the
TRAFFIC
Softkey. Traffic will now be
displayed on the map.
TIS Voice Alert
When a Traffic Advisory (TA) is displayed, a voice alert
“Traffic” is given.
“Traffic Not Available” will be heard whenever TIS
service becomes unavailable. This alert can be muted by
pressing the TNA MUTE Softkey. ‘TNA MUTE ON’ will
be displayed in the upper left of the display.
Seitenansicht 104
1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 141 142

Kommentare zu diesen Handbüchern

Keine Kommentare