
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
10-3
SECTION 10 – HAZARD
AVOIDANCE
To change the viewing mode between 360
˚
and 120˚:
1. Select the Stormscope Page.
2. Press the
VIEW
softkey. The
360
and
ARC
soft-
keys are displayed. Press the
360 softkey to
display a 360˚ viewing area or press the ARC
softkey to display a 120˚ viewing area.
Press the
CLEAR
softkey to remove all Storm-
scope lightning data from the display.
10.3 XM WEATHER (SERVICE OPTIONAL)
WARNING: XM Weather is not intended to
be used for hazardous weather penetration.
Weather information provided by XM Radio
Service is approved only for weather avoidance,
not penetration.
1. Press the
MAP
softkey.
2. Press the
NEXRAD or XM LTNG
softkey to dis-
play the desired weather. Press the applicable
softkey again to remove weather data from the
Navigation Map Page.
Figure 10-7 Navigation Map Page Displaying NEXRAD Weather
NOTE: Weather is not displayed on the Naviga-
tion Map Page at zoom levels less than 10 nm.
Displaying METAR and TAF information on the
Airport Information Page
To display METAR and TAF text on the Air-
port Information Page:
1. Turn the
large FMS
knob to select the WPT Page
Group.
2. Turn the
small FMS
knob to select the Airport
Information Page.
3. Press the WX softkey to display METAR and TAF
text (METAR and TAF information is updated
every 12 minutes).
Figure 10-8 METAR and TAF Text Displayed on the
Airport (Weather) Information Page
METAR
Text
TAF
Text
WX
Softkey
Kommentare zu diesen Handbüchern