Garmin 2006T Betriebsanweisung Seite 69

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 116
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 68
Garmin G950 Cockpit Reference Guide for the Tecnam P2006T
190-01147-01 Rev. A
53
Additional Features
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
SCHEDULER
SchedulermessagesappearintheAlertsWindowonthePFD.Whenascheduler
messageiswaiting,theALERTSSoftkeylabelchangestoADVISORY.Pressingthe
ADVISORY Softkey opens the Alerts Window and acknowledges the scheduler
message.ThesoftkeylabelrevertstoALERTSwhenpressed,theAlertsWindowis
removed from the display, and the scheduler message is deleted from the message
queue.
Message timers set to periodic alerting automatically reset to the original timer
valueoncethemessageisdisplayed.Whenpoweriscycled,allmessagesareretained
untildeleted,andmessagetimercountdownisresumed.
Enter a Scheduler Message
1)
Select the AUX - Utility Page.
2)
Press the FMS Knob momentarily to activate the flashing cursor.
3)
Turn the large FMS Knob to highlight the first empty scheduler message
naming field.
4)
Use the FMS Knob to enter the message text to be displayed in the Alerts
Window and press the
ENT
Key.
5)
Press the ENT Key again or use the large FMS Knob to move the cursor to
the field next to Type.
6)
Turn the small FMS Knob to select the message alert type:
• Event—Message issued at the specied date/time
• One-time—Message issued when the message timer reaches zero
(default setting)
• Periodic—Message issued each time the message timer reaches zero
7)
Press the ENT Key again or use the large FMS Knob to move the cursor to
the next field.
8)
For periodic and one-time message, use the FMS Knob to enter the timer
value (HH:MM:SS) from which to countdown and press the ENT Key.
9)
For event-based messages:
a)
Use the FMS Knob to enter the desired date (DD-MM-YY) and press
the ENT Key.
b)
Press the ENT Key again or use the large FMS Knob to move the cursor
to the next field.
Seitenansicht 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 115 116

Kommentare zu diesen Handbüchern

Keine Kommentare