
Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-00929-00 Rev. A
24
Flight Planning
Flight
Instruments
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
FeaturesAnnun/AlertsAppendixIndex
4)
Turn the small FMS Knob to display the Waypoint Information Window.
5)
Enter the identifier of the departure waypoint.
6)
Press the ENT Key.
7)
Repeat step number 4, 5, and 6 to enter the identifier for each additional
flight plan waypoint.
8)
When all waypoints have been entered, press the FMS Knob to return to the
Flight Plan Catalog Page. The new flight plan is now in the list.
Using the PFD
NOTE: If a flight plan is active, an additional flight plan cannot be entered
using the PFD.
NOTE: After the first leg is entered (using the PFD only) it is immediately
activated.
1)
Press the FPL Key on the PFD.
2)
Press the FMS Knob to activate the cursor.
3)
Turn the small FMS Knob to enter the first letter of the destination waypoint
identifier.
4)
Turn the large FMS Knob to the right to move the cursor to the next character
position.
5)
Repeat step 3 and 4 to spell out the rest of the waypoint identifier.
6)
Press the ENT Key and the cursor is now ready for entering of the next flight
plan waypoint.
7)
Repeat steps 3 through 6 to enter the identifier for each additional flight plan
waypoint.
8)
Once all waypoints have been entered, press the FMS Knob to remove the
cursor. The new flight plan is now active.
IMPORT A FLIGHT PLAN FROM AN SD CARD
1)
Insert the SD card containing the flight plan in the top card slot on the
MFD.
2)
Press the FPL Key on the Control Unit to display the Active Flight Plan Page
on the MFD.
Kommentare zu diesen Handbüchern