Garmin Software Version 0719.12 Betriebsanweisung Seite 65

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 178
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 64
Garmin G1000 Cockpit Reference Guide for the Socata TBM 850/900
190-00708-05 Rev. C 47
Procedures
Flight
Instruments EAS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
the approach and will provide navigation guidance relative to the final
approach course.
7)
Press the ENT Key. The cursor moves to the MINIMUMS field.
8)
If desired, the DA/MDA for the selected approach procedure may be
entered and displayed on the PFD. Turn the small
FMS
Knob in the
direction of the green arrow to change the display from OFF to BARO,
optional RAD ALT, or TEMP COMP.
9)
Press the
ENT
Key. The cursor moves to the altitude field. Turn the small
FMS
Knob to enter the published DA/MDA for the selected approach
procedure.
10)
Press the
ENT
Key. If BARO, RAD ALT, or OFF was selected step 8, proceed
to step 11. If TEMP COMP was selected in step 8, the cursor moves to the
‘TEMP AT.... field. Turn the small
FMS
Knob to enter the temperature at
the destination airport. The temperature compensated altitude minimum is
displayed below the previously enter minimum altitude value.
11)
Press the ENT Key. ‘LOAD? or ACTIVATE?’ is now displayed with ‘LOAD?’
highlighted.
12)
Turn the large FMS Knob to select either ‘LOAD?’ or ACTIVATE?’.
Selecting ‘LOAD?’ enters the selected approach procedure into the active
flight plan, but is not currently active. Selecting ACTIVATE?’ enters the
selected approach procedure into the active flight plan and activates the
first leg of the approach.
13)
Press the ENT Key.
ACTIVATE AN APPROACH IN THE ACTIVE FLIGHT PLAN
1)
Press the PROC Key.
2)
Turn the large FMS Knob to highlight ACTIVATE APPROACH’.
3)
Press the ENT Key.
ACTIVATE A VECTOR TO FINAL APPROACH FIX
1)
Press the PROC Key.
2)
Turn the large FMS Knob to highlight ACTIVATE VECTOR-TO-FINAL’.
3)
Press the ENT Key.
4)
The final approach course becomes the active leg.
Seitenansicht 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 177 178

Kommentare zu diesen Handbüchern

Keine Kommentare