
Garmin G1000 Cockpit Reference Guide for the Piper PA-46 Meridian
190-00764-00 Rev. A
9
Nav/Com/XPDR/Audio Panel
Flight
Instruments EICAS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
NAV/COM/TRANSPONDER/AUDIO PANEL
ENTER A TRANSPONDER CODE
1)
Select the XPDR Softkey to display the transponder mode selection
softkeys.
2)
Select the CODE Softkey to display the transponder code selection softkeys,
for digit entry.
3)
Use the digit keys to enter the code in the code field. When entering the
code, the next key in sequence must be pressed within 10 seconds, or the
entry is cancelled and restored to the previous code. Five seconds after the
fourth digit has been entered, the transponder code becomes active.
SELECTING A COM RADIO
Transmit/Receive
Press the COM1 MIC
,
COM2 MIC
, or
COM3 MIC Key (optional COM, if
installed) on the audio panel.
Receive Only
Press the COM1, COM2
, or
COM3 Key (optional COM, if installed) on the
audio panel.
SELECTING A NAV RADIO
1)
Select the CDI Softkey to select NAV1 (VOR1/LOC1) or NAV2 (VOR2/LOC2).
2)
Pressing the NAV1
or NAV2
Key selects and deselects the navigation radio
audio source. All radio keys can be selected individually or together.
NAV/COM TUNING
1)
Press the small tuning knob to select the desired radio for tuning.
2)
Turn the respective tuning knobs to enter the desired frequency into the
standby frequency field. The large knob enters MHz and the small knob
enters kHz.
3)
Press the Frequency Transfer Key to place the frequency into the active
frequency field.
Kommentare zu diesen Handbüchern