
Garmin G1000 Cockpit Reference Guide for the Quest Kodiak 100
190-00645-01 Rev. A 23
Flight Planning
Flight
Instruments EIS
Nav/Com/
XPDR/Audio GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
4)
Turn the small FMS Knob to display the Waypoint Information Window.
5)
Enter the identifier of the departure waypoint.
6)
Press the ENT Key.
7)
Repeat step number 4, 5, and 6 to enter the identifier for each additional
flight plan waypoint.
8)
When all waypoints have been entered, press the FMS Knob to return to the
Flight Plan Catalog Page. The new flight plan is now in the list.
Using the PFD
NOTE: If a flight plan is active, an additional flight plan cannot be entered
using the PFD.
NOTE: After the first leg is entered (using the PFD only) it is immediately
activated.
1)
Press the FPL Key.
2)
Turn the small FMS Knob to display the Waypoint Information Page.
3)
Turn the small FMS Knob to enter the first letter of the destination waypoint
identifier.
4)
Turn the large FMS Knob to the right to move the cursor to the next character
position.
5)
Repeat step 3 and 4 to spell out the rest of the waypoint identifier.
6)
Press the ENT Key and the cursor is now ready for entering of the next flight
plan waypoint.
7)
Repeat steps 3 through 6 to enter the identifier for each additional flight plan
waypoint.
8)
Once all waypoints have been entered, press the FMS Knob to remove the
cursor. The new flight plan is now active.
INSERT A WAYPOINT IN THE ACTIVE FLIGHT PLAN
1)
Press the FPL Key to display the active flight plan.
2)
If required, press the FMS Knob to activate the cursor.
3)
Turn the large FMS Knob to highlight the desired flight plan waypoint. The
new waypoint is inserted before the highlighted waypoint.
Kommentare zu diesen Handbüchern