Garmin Software Version 0552.00 Betriebsanweisung Seite 101

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 108
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 100
190-00645-00 Rev. A
Garmin G1000 Cockpit Reference Guide for the Quest Kodiak 100
12-15
SECTION 12 – ANNUNCIATIONS
& ALERTS
GDL 69 Message Advisories
Alerts Window Message Comments
GDL69 CONFIG – GDL 69 configura-
tion error. Config service req’d.
GDL 69 configuration settings do not match those of backup configuration memory.
The G1000 system should be serviced.
GDL69 FAIL
– GDL 69 has failed. A failure has been detected in the GDL 69. The receiver is unavailable. The G1000
system should be serviced
GDC 74A Message Advisories
Alerts Window Message Comments
GDC1 CONFIG – GDC1 configuration
error. Config service req’d.
GDC 74A configuration settings do not match those of backup configuration
memory. The G1000 system should be serviced.
MANIFEST – GDC1 software
mismatch. Communication halted.
The GDC 74A has incorrect software installed. The G1000 system should be
serviced.
BACKUP PATHADC1 using backup
data path.
The GDC 74A is using a backup communications data path. The G1000 system
should be serviced when possible.
Miscellaneous Message Advisories
Alerts Window Message Comments
FPL WPT LOCK – Flight plan waypoint
is locked.
Upon power-up, the G1000 system detects that a stored flight plan waypoint is
locked. This occurs when an aviation database update eliminates an obsolete way
-
point. The flight plan cannot find the specified waypoint and flags this message. This
can also occur with user waypoints in a flight plan that is deleted.
Remove the waypoint from the flight plan if it no longer exists in any database,
OR
update the waypoint name/identifier to reflect the new information.
FPL WPT MOVE
– Flight plan
waypoint moved.
The system has detected that a waypoint coordinate has changed due to a new
aviation database update. Verify that stored flight plans contain correct waypoint
locations.
TIMER EXPIRDTimer has expired. The system notifies the pilot that the timer has expired.
DB CHANGE – Database changed.
Verify user modified procedures.
This occurs when a stored flight plan contains procedures that have been manually
edited. This alert is issued only after an aviation database update. Verify that the
user-modified procedures in stored flight plans are correct and up to date.
Seitenansicht 100
1 2 ... 96 97 98 99 100 101 102 103 104 105 106 107 108

Kommentare zu diesen Handbüchern

Keine Kommentare