400W Series Rotorcraft 190-00356-21 Rev. C
Instructions for Continued Airworthiness Page 10 of 15
2.8 Diagrams
Refer to the 400W Series Installation Manual, P/N 190-00356-02 and STC Rotorcraft Installation
Supplement for 400W/500W Series, P/N 190-00357-22 (listed under reference documentation in section
2.1 of this document) for drawings applicable to this installation. Point to point wiring diagrams are in
Appendix H of the 400W Series Installation Manual, and Appendix D of the STC Rotorcraft Installation
Supplement for 400W/500W Series. Refer to the GNS 400W Series Post-Installation Checkout Log
retained in the rotorcraft permanent records for a list of the interfaced equipment. The antenna cables
are routed between the 400W Series unit and the antenna with disconnects at each unit. A Rotorcraft
wire routing diagram is contained in Appendix A of this document.
2.9 General Procedural Instructions
Weight and balance computation may be required after maintenance of the 400W System installation.
Follow the guidelines in the airframe manufacturer’s manual. If none are available, use the guidelines
established in AC 43.13-1B, Chapter 10, Section 2. Make appropriate entries in the equipment list
indicating items added, removed, or relocated along with the date accomplished. Include your name and
certificate number in the rotorcraft records. Table 2 identifies the weight of the 400W System equipment.
Table 3 lists the location of the 400W System equipment as filled out by the installer.
Table 2: Unit Weight Information
GPS 400W Weight (Installed with rack and back plate)
5.0 lbs. (2.27 kg)
GNC 420W/AW Weight (Installed with rack and back plate)
5.5 lbs. (2.49 kg)
GNS 430W/AW Weight (Installed with rack and back plate)
6.2 lbs. (2.81 kg)
GA 35 Weight
0.47 lbs (0.21 kg)
Garmin P/N 115-00846-10 Doubler Weight (Option used as
backing plate for GA 35)
0.09 lbs (0.04 kg)
GA 35 Fabricated backing plate (Installer to Fill in if
Applicable)
GA 36 Weight
0.47 lbs (0.21 kg)
GA 37 Weight
0.50 lbs (0.23 kg)
Garmin P/N 115-00846-00 Doubler Weight (Option used as
backing plate for GA 36 or GA 37)
0.17 lbs (0.08 kg)
GA 36 or GA 37 Fabricated backing plate (Installer to Fill in if
Applicable)
(24 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern