
Garmin G1000 Cockpit Reference Guide for the Hawker Beechcraft C90A/GT
190-00664-01 Rev. A
40
Hazard Avoidance
Flight
Instruments
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
FeaturesAnnun/AlertsAppendixIndex
Displaying Traffic on the Traffic Map Page
1)
Turn the large FMS Knob to select the Map Page Group.
2)
Turn the small FMS Knob to select the second rectangular page icon.
3)
Select the NORMAL Softkey to begin displaying traffic. ‘OPERATING’ is
displayed in the Traffic Mode field.
4)
Select the ALT MODE Softkey to change the altitude display volume.
Select the desired altitude volume by selecting the BELOW, NORMAL,
ABOVE, or UNREST (unrestricted) Softkey. The selection is displayed in the
Altitude Mode field.
5)
Select the STANDBY Softkey to place the system in the Standby Mode.
‘STANDBY’ will be displayed in the Traffic Mode field.
6)
Rotate the Joystick clockwise to display a larger area or rotate counter-
clockwise to display a smaller area.
Displaying Traffic on the Navigation Map
1)
With the Navigation Map displayed, select the MAP Softkey.
2)
Select the TRAFFIC Softkey. Traffic will now be displayed on the map.
TERRAIN AWARENESS & WARNING SYSTEM (TAWS) DISPLAY
NOTE: Terrain data is not displayed when the aircraft latitude is greater than
75 degrees north or 60 degrees south.
NOTE: TAWS operation is only available when the G1000 is configured for a
TAWS-B installation.
Manual System Test
1)
While the TAWS-B Page is displayed, press the MENU Key.
2)
Turn the small FMS Knob to select ‘Test TAWS System’.
3)
Press the ENT Key. During the test ‘TAWS TEST’ is displayed in the center
of the TAWS-B Page.
When all is in working order, “TAWS System Test, OK” will be heard.
Kommentare zu diesen Handbüchern