Garmin GPSMAP 2210 Bedienungsanleitung PDF herunterladen (Seite 66)

58 GPSMAP 2206/2210 Owner’s Manual

MAIn Menu > systeM tAb

Sonar Alarms

Use the Sonar sub tab to set sonar* alarms, including shallow or deep water,

water temperature, and sh.

• Shallow Water/Deep Water—sets an alarm to sound when you enter

an area of specied depth that is too shallow or too deep. You must be

receiving sonar data for this function to work.

•

Water Temperature—sets an alarm to sound when the transducer reports

a temperature either above, below, inside, or outside the specied values.

•

Fish —sets an alarm to sound when the unit detects a sh of the specied

symbols.

*You must be receiving NMEA sonar data or using a GSD 20, GSD 21, or GSD 22 for the

sonar alarms to function.

System Tab

The System tab consists of ve sub tabs:General, Units, Time, Comm, and

Update.

General Sub Tab

Use the General sub tab to control system settings for system mode, speed lter,

automatic backlight, beeper, language, simulator controls, restore factory default

settings, and to view the software version.

The following settings and options are available:

•

System Mode—select Normal (normal navigation) or Simulator (for

practice only). For more information about Simulator Mode, see “Simulator

Mode” on page 8.

•

Speed Filter—averages speed readings. Select Off, Auto (automatically

controls ltering), or On (allows you to enter a value from

1 to 255 seconds).

•

Automatic Backlight—automatically adjusts the display brightness to a

specied level at sunrise and sunset. You can specify offset minutes for

before sunrise and after sunset.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 105 106

Keine Kommentare

Garmin GPSMAP 2210 Bedienungsanleitung Seite 66