Garmin GPSMAP 185 Sounder Bedienungsanleitung PDF herunterladen (Seite 106)

SECTION

APPENDIX

Loran TD Position Format

When creating new waypoints using Loran TD coordinates you must set

the correct loran chain number and secondary stations in the Setup TD

field before storing the waypoint. After the waypoint is stored in unit

memory, it will always reference the loran chain number and secondary

stations currently selected in the Setup TD field. If you enter a different

loran chain number or change the secondary stations in the Setup TD

field, the active waypoint information will reflect those changes. Since

the GPSMAP 185 Sounder does not rely on the loran signal for naviga-

tion, it can reference a different GRI chain and/or secondary stations and

still navigate to the location stored in memory.

To change the Setup TD settings:

1. Highlight the Setup TD field and press

2. Select the field to change and press

3. Highlight the new setting and press

1 2 ... 101 102 103 104 105 106 107 108 109 110

Keine Kommentare

Garmin GPSMAP 185 Sounder Bedienungsanleitung Seite 106