Garmin Montana 600 Bedienerhandbuch PDF herunterladen (Seite 4)

4 Montana600SeriesMarineMountInstructions

1. Separate the swivel base

➊

from the mount.

2. Using the swivel base as a template, mark the pilot hole

locations

➋

3. Drill the mounting holes.

• If you secure the base with machine bolts, drill three

5/32 in. (5 mm) holes at the locations you marked.

• If you secure the base with self-tapping screws,

drill three 1/16 in. (1.5 mm) starter holes at the

locations you marked. Do not make the starter

holes deeper than half of the screw length.

4. Secure the swivel base with 3 bolts or 3 screws

➌

(not included).

5. Place the swivel mount bracket

➍

over the swivel

base and secure it with the short knob

➎



1. Align the slot

➊

on the back of the cradle with the

long mounting knob

➋

and slide the cradle into place

on the bar.

If necessary, you can adjust the knob to spread the

bracket arms apart. Turn the knob counter-clockwise

to widen the bracket arms, turn the knob clockwise

to tighten the bracket arms.

➌

➍

➎

➊

➋

➊

1 2 3 4 5 6 7 8 9 ... 87 88

Keine Kommentare

Garmin Montana 600 Bedienerhandbuch Seite 4